Help needed to select a Motion Control Card.

Hello All,

I recently joined this group. I am working on used CNC Milling/Lathe machines to
repair/replace their control panel and/or malfunctioned drives.
In this regard, I need some information regarding Motion Control Cards, there are
lots of products available over the Internet offering multi-axis DSP based motion
control cards.

Can anybody please help me select a card from the following list:

PMD's Magellan-PCI Series
http://www.motioncontrol.com/MyAccount/access.cfm?referer=%2Fnewproducts%2Fdetail%2Ecfm%3Fid%3D1631
AD Link PCI-8174
http://www.adlinktech.com/PD/web/PD_detail.php?pid=675
DMC5400 Motion Controller
http://www.oceancontrols.com.au/motor_controller/leadshine/DMC5400_motion_controller.htm
PIC-SERVO Motion Control Board
http://www.jrkerr.com/boards.html

It would be highly appreciable if someone, familiar with any of the above products or same,
shall exchange the experiences.

My primary concern is a mature product with lots of support over the web, real-time
feedback from machine, easy to program and control.

It would also be appreciated if the price is reasonable.


Thanks



____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


[Non-text portions of this message have been removed]