Re: [CAD_CAM_EDM_DRO] Re: "Homemade moglice"

Here is a source: http://www.sentrysolutions.com/BP2000.shtml
I used to get some from a welding equipment supplier that was used to
lubricate mig wire guide sleeves.
Apparently this is not sold for this ant\y more but I still have some-
jesse

On Apr 2, 2008, at 11:53 AM, Ralph Reese wrote:


Try the following link
http://www.rosemill.com/product.asp?productid=258465

They will only sell up to 200 lbs online!

Ralph M. Reese

To: CAD_CAM_EDM_DRO@yahoogroups.comFrom: elson@...:
Wed, 2 Apr 2008 11:43:24 -0600Subject: Re: [CAD_CAM_EDM_DRO] Re:
"Homemade moglice"

Yahoo wrote:> Where in the heck does one get molybdenum disulfide and
PTFE in powder form?I've got several pounds of "virgin Teflon", ie.
the stuff as it is scraped out of the pressure vessels where it is
formed. it looks something like snow with powdered sugar mixed in. If
anyone needs some, I am not using it. (It is used in this form to
fill molds, but my mold had too complex a shape and I got uneven
filling, so I ended up having to machine the parts from solid. So, I
have lots left over.)Molybdenum diSulfide is usually added into a
grease, and for the epoxy project you need the non-greased stuff. I
suspect it will be harder to find in that form.Jon

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]