FS: Several Lathes (or parts) for Sale
Posted by
C.S. Mo
on 2008-06-17 13:08:16 UTC
Sorry about the cross-posts...
I'm finally admitting that I simply don't have time to work on these
things and need to clear out some room....
Early Model 8 Wade Lathe - $750 - ~8.5"x24", ~1" throughhole, includes
nice 3-jaw chuck, collet closer and some collets. Overall in very good
condition, some backlash on the cross-slide, screw and nut are in good
condition - just need to tighten up the nut a bit.
Pictures here:
<http://www.smidgie.com/wade/>
More information here:
<http://www.lathes.co.uk/wade/page22.html>
Prazi SD 300 - $50 - this one is in very sad shape, the cross-slide was
broken off (I may be able to find it, no promises) and its been sitting
around in my basement collecting dust for many years...
<http://www.smidgie.com/prazi.jpg>
Hardinge CHNC Turret Lathe - $150 - this is the bed, leadscrew, carriage
and headstock only. No tooling, no parts except what is pictured. The
dolly is not included.
<http://www.smidgie.com/hardinge/>
Troglia 13x40 - $800 - this lathe is completely disassembled. I have
stripped and re-painted the headstock and part of the apron, but much
still needs to be done! I have quite a lot of tooling to go with this,
including steady rest, follow rest, several chucks, collet closer (if I
can find it), brand new replacement bearings for the spindle (these cost
me over $300 alone) probably various other stuff... If you're actually
interested at, or close to, my asking price, let me know and I'll get
some pictures together...
Here's some pictures from when I first got it:
<http://www.smidgie.com/928/machineshop/lathe/>
And some pictures of the re-finished parts:
<http://www.smidgie.com/troglia/>
All items are located in Watertown, MA, except for the Wade which is in
Cambridge, MA. I'd *really* prefer not to ship but I will if necessary.
These days shipping is likely to be pretty expensive though!
--C.S.
I'm finally admitting that I simply don't have time to work on these
things and need to clear out some room....
Early Model 8 Wade Lathe - $750 - ~8.5"x24", ~1" throughhole, includes
nice 3-jaw chuck, collet closer and some collets. Overall in very good
condition, some backlash on the cross-slide, screw and nut are in good
condition - just need to tighten up the nut a bit.
Pictures here:
<http://www.smidgie.com/wade/>
More information here:
<http://www.lathes.co.uk/wade/page22.html>
Prazi SD 300 - $50 - this one is in very sad shape, the cross-slide was
broken off (I may be able to find it, no promises) and its been sitting
around in my basement collecting dust for many years...
<http://www.smidgie.com/prazi.jpg>
Hardinge CHNC Turret Lathe - $150 - this is the bed, leadscrew, carriage
and headstock only. No tooling, no parts except what is pictured. The
dolly is not included.
<http://www.smidgie.com/hardinge/>
Troglia 13x40 - $800 - this lathe is completely disassembled. I have
stripped and re-painted the headstock and part of the apron, but much
still needs to be done! I have quite a lot of tooling to go with this,
including steady rest, follow rest, several chucks, collet closer (if I
can find it), brand new replacement bearings for the spindle (these cost
me over $300 alone) probably various other stuff... If you're actually
interested at, or close to, my asking price, let me know and I'll get
some pictures together...
Here's some pictures from when I first got it:
<http://www.smidgie.com/928/machineshop/lathe/>
And some pictures of the re-finished parts:
<http://www.smidgie.com/troglia/>
All items are located in Watertown, MA, except for the Wade which is in
Cambridge, MA. I'd *really* prefer not to ship but I will if necessary.
These days shipping is likely to be pretty expensive though!
--C.S.