CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code.

Posted by John Dammeyer
on 2008-12-13 16:34:54 UTC
Hi Alan,

Thanks!

I've almost got Jon Elson's program working. At the moment it reports
about 66 holes where there are really 126. It appears to be skipping
every second line. So far though the generated files do run on MACH.

I'll post the source for the Microsoft Express version when I'm done.

John


Automation Artisans Inc.
http://www.autoartisans.com/ELS/
Ph. 1 250 544 4950


> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Alan Rothenbush
> Sent: Friday, December 12, 2008 3:26 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code.
>
>
> I bought a copy of DeskPCB a couple of years ago (and still
> haven't used
> it).
>
> It's supposed to open an Excellon file .. I'll happily give
> it a go for
> you ...
>
> Alan
>
>
> > -----Original Message-----
> > From: CAD_CAM_EDM_DRO@yahoogroups.com
> > [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of John Dammeyer
> > Sent: Friday, December 12, 2008 2:55 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code.
> >
> > Hi,
> >
> > I have an excelon drill file created by my Protel PCB
> > software. Would someone be able to run this file through a
> > converter to turn it into a G-Code file compatible with
> > MACH3? I don't have time to wait for a circuit board to be
> > made and I just want to clamp a blank PCB onto the table of a
> > mill and have it drill the holes to make sure the prototype
> > board will fit properly.
> >
> > Thanks
> >
> > John
> >
> > Automation Artisans Inc.
> > http://www.autoartisans.com/ELS/
> > Ph. 1 250 544 4950
> >
> >
> > ------------------------------------
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> > wanliker@..., timg@...
> > Moderator: pentam@... indigo_red@...
> > davemucha@... [Moderators] URL to this group:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider
> > this to be a sister site to the CCED group, as many of the
> > same members are there, for OT subjects, that are not allowed
> > on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> > POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> > EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
>
>

Discussion Thread

eugenelambe1 2008-12-12 08:05:16 UTC boxford 160 slant bed John Dammeyer 2008-12-12 14:55:59 UTC Excelon Drill file to MACH3 G-Code. Jon Elson 2008-12-12 20:21:24 UTC Re: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. Alan Rothenbush 2008-12-12 21:58:00 UTC RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. Peter Homann 2008-12-12 23:12:16 UTC Re: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. John Dammeyer 2008-12-13 16:34:44 UTC RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. John Dammeyer 2008-12-13 16:34:54 UTC RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. John Dammeyer 2008-12-13 16:35:06 UTC RE: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. Jon Elson 2008-12-13 17:31:13 UTC Re: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code. Zoran A. Scepanovic 2008-12-14 02:07:15 UTC Re: [CAD_CAM_EDM_DRO] Excelon Drill file to MACH3 G-Code.