CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] fastener thread pitch choice

Posted by Jack McKie
on 2009-07-12 09:19:44 UTC
Hi Dennis,
 
I used 10-32 in 6061T6 aluminum and tooling plate on both my router and mill retro w/o problems.   Hope that helps.  What are you building?
 
Jack


--- On Sun, 7/12/09, dcassyc1 <denisc1@...> wrote:


From: dcassyc1 <denisc1@...>
Subject: [CAD_CAM_EDM_DRO] fastener thread pitch choice
To: CAD_CAM_EDM_DRO@yahoogroups.com
Date: Sunday, July 12, 2009, 12:12 PM








Hi Everyone,
are fine thread 10-32 screws better than 10-24 screws for fasteneing step motors on to aluminum machine frame or aluminum gearheads? Can the 10-32 screw be torqued to the same value as a 10-24 thread? Will the screws hold the joint together as tightly? If a steel screw threads into an aluminum thread should the threads be coated with an anti sieze compound? I hope everyone has a great summer.
thanks,
Denis



















[Non-text portions of this message have been removed]

Discussion Thread

dcassyc1 2009-07-12 09:13:21 UTC fastener thread pitch choice Jack McKie 2009-07-12 09:19:44 UTC Re: [CAD_CAM_EDM_DRO] fastener thread pitch choice Denis Casserly 2009-07-12 12:38:41 UTC Re: [CAD_CAM_EDM_DRO] fastener thread pitch choice Jack McKie 2009-07-12 13:08:00 UTC Re: [CAD_CAM_EDM_DRO] fastener thread pitch choice H & J Johnson 2009-07-12 16:29:38 UTC Re: [CAD_CAM_EDM_DRO] fastener thread pitch choice Andy Wander 2009-07-12 16:37:43 UTC RE: [CAD_CAM_EDM_DRO] fastener thread pitch choice Chuck Merja 2009-07-12 21:56:01 UTC RE: [CAD_CAM_EDM_DRO] fastener thread pitch choice Torsten 2009-07-15 19:08:49 UTC Re: fastener thread pitch choice