CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: heads up

Posted by Dave Halliday
on 2010-10-21 21:37:34 UTC
And the flourescent tubes are dead easy to replace. Costs about $20 in the
USA. Google it.

Dave

> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Andy Wander
> Sent: Thursday, October 21, 2010 5:39 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: RE: [CAD_CAM_EDM_DRO] Re: heads up
>
> All good points-but if the price on a used screen is good,
> then you may still be better off trying that. I purchased a
> used 15" elo about 6 years ago, and it is still going string.
> I think it cost about $150.
>
>
> Andy Wander
>
>
> -----Original Message-----
> From: CAD_CAM_EDM_DRO@yahoogroups.com
> [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of
> Andrewdavid.mathison
> Sent: Thursday, October 21, 2010 8:33 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: heads up
>
> I would be careful with second hand LCD screens if I were
> you, the lighting is usually <895%) tiny fluorescent tubes
> with a relatively short lifetime, especially if used
> commercially and left switched on all the time.
> they also contain mercury....
>
> Modern good screens have LED backlights, but that is really
> really new....anything less is not good enough.
>
> My personal take is buy new and LED backlighting, otherwise
> you may have bought a 10 day wonder, probably with no guarantee...
>
> Greetings from
>
> Andy Mathison
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
> This communication including any attachments, are intended
> for the exclusive use of the addressee(s) and contains
> confidential or copyrighted materials. Duplication,
> distribution or reproduction is strictly prohibited by law
> without written permission of Verrex
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@..., timg@...
> Moderator: pentam@... indigo_red@...
> davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider
> this to be a sister site to the CCED group, as many of the
> same members are there, for OT subjects, that are not allowed
> on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>

Discussion Thread

diazden 2010-10-20 01:23:18 UTC heads up Stan Lewis 2010-10-20 06:30:29 UTC Re:heads up 556RECON 2010-10-20 07:45:21 UTC Re: [CAD_CAM_EDM_DRO] heads up Andrewdavid.mathison 2010-10-21 05:33:04 UTC Re: heads up Andy Wander 2010-10-21 05:38:57 UTC RE: [CAD_CAM_EDM_DRO] Re: heads up Dave Halliday 2010-10-21 21:37:34 UTC RE: [CAD_CAM_EDM_DRO] Re: heads up