Re: [CAD_CAM_EDM_DRO] Re: Old Vector CAD/CAM on Windoz 7?

I emailed IMService a day or so ago, and got the same form letter.

You were successful?

My version is 10.0.026.

Thanks!

Alan

> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "J J Larsen"<jjl@...> wrote:
>>
>> I’m running 10.0.044 on Win 7 (32 bit)
>>
>> Got some help from IMService, see below:
>>
>> /Jens
>>
>> From: IMService
>> Sent: Tuesday, December 28, 2010 5:20 PM
>> To: jjl@...
>> Subject: Re: Reinstalling Vector
>>
>> Run both Vector.exe and VectorNC.exe as administrative user.
>>
>>
>>
>> Best Regards,
>>
>> IMService Customer Support
>>
>>
>>
>>> From: IMService
>>> Sent: Monday, December 27, 2010 4:00 PM
>>> To: jjl@...
>>> Subject: Reinstalling Vector
>>
>>> Hi,
>>
>>> Change version numbers below to the one you are using:
>>
>>> For installation it is important that the date is correct
>>> on your computer.
>>
>>> To initiate Vector, you need a floppy diskette with the
>>> same version number on the label as the CD. Look on your
>>> floppy diskette label. It must be preprinted with your
>>> name, and the words: "9.6 License code".
>>> It will also have instructions on how to initiate. I will
>>> include them below, too. 9.0 will not work with 9.3, if it
>>> does not say "license code", it is probably a demo code,
>>> and has expired.
>>
>>> So
>>> 1. Date Correct
>>> 2. Install from 9.6 CD Do NOT try to copy the Vector from
>>> one computer to another. You need the installation file
>> >from the CD to install Vector.
>>> 3. Initate with 9.6 license code floppy or just copy the
>>> vector.ini file from the floppy into the Vec96 directory to
>>> initiate.
>>> 4. Start Vector
>>
>>> If the floppy is corrupted and does not work, or if you
>>> lost it, you may be able to retrieve the vector.ini file
>> >from a computer with another installation of Vector 9.6.
>>> Copy the vector.ini file into your Vec96 directory,
>>> replacing the file there already, and Vector should work.
>>> You may Email or copy the file using a floppy, or flash
>>> drive, not a CD. The CD will change the file and it will
>>> not work. We do not replace 9.6 codes or floppy diskettes.
>>
>>> Depending on your computer's View option settings, you may
>>> see the file as just vector not vector.ini. It is a text
>>> file that will open in notepad and show your name and user
>>> code. The whole file must be copied and pasted into the
>>> vector directory to make it work. You are replacing or
>>> overwriting the temp vector.ini file that is there when
>>> Vector installs from the CD with your license code
>>> vector.ini So say Yes, when asked to overwrite it.
>>
>>> But please backup your files and CD for future use. We no
>>> longer can replace older version CD or codes.
>>
>>> Hope that helps. If you have Windows 7 you will have to
>>> set up for Vector being a 32 bit program instead of 64 bit.
>>
>>
>>> Best Regards,
>>
>>> IMService Customer Support
>>
>>
>>
>> From: KM6VV
>> Sent: Friday, December 31, 2010 5:58 PM
>> To: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subject: [CAD_CAM_EDM_DRO] Old Vector CAD/CAM on Windoz 7?
>>
>>
>> Cross posted to SherlineCNC and CAD_CAM_EDM_DRO lists.
>>
>> Has anyone been able to run an older Vector CAD/CAM (10.0x) on the new
>> Windoz 7 OS?
>>
>> I've played with loading under "admin", and setting compatibility mode
>> to XP patch 3, but no success.
>>
>> Thanks!
>>
>> Alan KM6VV
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
> Yahoo! Groups Links
>
>
>
>