Re: [CAD_CAM_EDM_DRO] Rotating XY axis in Mach3
Posted by
Ron Thompson
on 2011-01-20 06:51:00 UTC
On 1/20/2011 9:14 AM, H & J Johnson wrote:
sample issue with the article on this!
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
> Digital MachinistThank you. This is exactly what I had in mind. Digital Machinist has a
sample issue with the article on this!
--
Ron Thompson
On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
There are two kinds of posts on newsgroups.
1. This is what I have done...
2. This is what I think...
Be aware of the difference!
http://www.ourcadguy.com/
http://www.plansandprojects.com My hobby pages are here:
http://www.plansandprojects.com/My%20Machines/
Visit the castinghobby FAQ:
http://castinghobbyfaq.bareboogerhost.com/
Discussion Thread
Ron Thompson
2011-01-20 05:59:12 UTC
Rotating XY axis in Mach3
H & J Johnson
2011-01-20 06:14:46 UTC
Re: [CAD_CAM_EDM_DRO] Rotating XY axis in Mach3
Ron Thompson
2011-01-20 06:51:00 UTC
Re: [CAD_CAM_EDM_DRO] Rotating XY axis in Mach3
H & J Johnson
2011-01-20 06:56:02 UTC
Re: [CAD_CAM_EDM_DRO] Rotating XY axis in Mach3
Ron Thompson
2011-01-20 07:00:43 UTC
Re: [CAD_CAM_EDM_DRO] Rotating XY axis in Mach3