Re: [CAD_CAM_EDM_DRO] Re: [sherline] holding rings

Alan,
Where can I get more info on the CNC-3700?
Darrell

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: <sherline@egroups.com>; "CAD CAM EDM DRO" <CAD_CAM_EDM_DRO@egroups.com>
Sent: Monday, August 14, 2000 1:20 PM
Subject: [CAD_CAM_EDM_DRO] Re: [sherline] holding rings


> Hi Dan,
>
> Well, I wrote a simple 'C' program last night. It takes as arguments:
>
> FileName.CNC Diameter, Height, Depth, Cycles, Precision, Tool Diameter.
>
> And it generates CNC code (6 KB). I have it running, except for
> subtracting the tool diameter, Just remembered that the program will
> need to reduce the "height" by the tool diameter (1/2 on top, 1/2 on
> bottom). I'm checking it out, I believe it does what you asked for.
> All I can machine for now is a "flat" ring, as I don't have the rotary
> table yet ;>)
>
> Sounds like you're ready to buy a rotary table! I'd suggest a 3700-CNC,
> so you have the motor mount included, ready to add a stepper motor.
> Please contact me off line if you're interested in what I've written!
>
> Alan
>
> Dan Statman wrote:
> >......cut
> > Now I need to get a rotary table. Anyone want to
> > sell me one for more than the standard 15% discount. If you do, please
> > offer off-list so that only you and I need to know.
> >
> > Thanks, Dan.
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>