Re: [CAD_CAM_EDM_DRO] Re: [sherline] holding rings

Darrell,

You can find an instruction manual on sherline's page: 3700-4" Rotary
table

http://www.sherline.com/accessor.htm


3700-CNC
4" PRECISION ROTARY TABLE,
CNC-READY (Includes stepper motor mount
ready for application of your own stepper motor
and CNC controls. Handwheel also included)
(NEW 1/00!) 11 LBS, $300.00


You might also want (need) the 3701 Right Angle Attachment $55, 3702
Tailstock $55, 3750 Tilting Angle Table $100. I do! I'm anxious to get
the rotary table!

Alan

P.S., I'm not connected to Sherline. I believe Ron Ginger is a Sherline
Dealer. I'm not connected to him either!


Darrell wrote:

>
> Alan,
> Where can I get more info on the CNC-3700?
> Darrell
>
> ----- Original Message -----
> From: "Alan Marconett KM6VV" <KM6VV@...>
> To: <sherline@egroups.com>; "CAD CAM EDM DRO" <CAD_CAM_EDM_DRO@egroups.com>
> Sent: Monday, August 14, 2000 1:20 PM
> Subject: [CAD_CAM_EDM_DRO] Re: [sherline] holding rings
>
> > Hi Dan,
> >
> > Well, I wrote a simple 'C' program last night. It takes as arguments:
> >
> > FileName.CNC Diameter, Height, Depth, Cycles, Precision, Tool Diameter.
> >
> > And it generates CNC code (6 KB). I have it running, except for
> > subtracting the tool diameter, Just remembered that the program will
> > need to reduce the "height" by the tool diameter (1/2 on top, 1/2 on
> > bottom). I'm checking it out, I believe it does what you asked for.
> > All I can machine for now is a "flat" ring, as I don't have the rotary
> > table yet ;>)
> >
> > Sounds like you're ready to buy a rotary table! I'd suggest a 3700-CNC,
> > so you have the motor mount included, ready to add a stepper motor.
> > Please contact me off line if you're interested in what I've written!
> >
> > Alan
> >
> > Dan Statman wrote:
> > >......cut
> > > Now I need to get a rotary table. Anyone want to
> > > sell me one for more than the standard 15% discount. If you do, please
> > > offer off-list so that only you and I need to know.
> > >
> > > Thanks, Dan..