CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine

Posted by Drew Rogge
on 2012-07-09 11:52:32 UTC
The contact page on kelingnc.net says they have a new website athttp://www.automationtechnologiesinc.com/
The 40W laser is listed there.


On 07/07/2012 06:30 AM, Jack McKie wrote:
> Hi Ron,
>
> I didn't find the Laser on his web site but on eBay and an exchange of email divulged that it was Keling. On another forum I learned that this paticular laser probably won't suit my needs due to the large laser kurf being roughly double that of the lasers that have cut my parts in the past, mechanical issues and software issues. Disappointing but better to learn before spending $800.
>
> I am now considering building a laser based on some Thomson Super Slides I have. The goal is to be able to cut 6"X24" area or larger in order to accomodate standard basswood sheets. The cost of the laser componants and controller will be expensive compared to the Keling machine but might be a bit better in the long run.
>
> Jack
>
> From: Ron Ginger<ronginger@...>
> To: "CAD_CAM_EDM_DRO@yahoogroups.com"<CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, July 7, 2012 9:18 AM
> Subject: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine
>
>
>
>
>> Has anyone done business with Keling and if so how was their customer
>> service?
>
> Keling is excellent to buy from. I have bought many motors and drivers
> from them- most recently the 12 units for the CNC workshop were
> purchased from them. Everything promised arrived exactly as ordered, I
> have never had a failure of any of his products.
>
> I didnt know he was selling a laser, I will likely buy one.
>
> ron ginger

Discussion Thread

Jack 2012-07-06 11:24:37 UTC Keling - Laser Cutting/Engraving Machine chuck merja 2012-07-06 14:13:59 UTC Re: [CAD_CAM_EDM_DRO] Keling - Laser Cutting/Engraving Machine Tony Smith 2012-07-07 01:14:50 UTC RE: [CAD_CAM_EDM_DRO] Keling - Laser Cutting/Engraving Machine Ron Ginger 2012-07-07 06:17:06 UTC Re: Keling - Laser Cutting/Engraving Machine Jack McKie 2012-07-07 06:30:42 UTC Re: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Tony Smith 2012-07-07 07:15:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Dan Mauch 2012-07-07 07:56:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine cghc54 2012-07-07 14:14:17 UTC Re: Keling - Laser Cutting/Engraving Machine Stephen Muscato 2012-07-08 10:49:23 UTC Re: [CAD_CAM_EDM_DRO] Keling - Laser Cutting/Engraving Machine Tony Smith 2012-07-08 11:57:04 UTC RE: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Peter 2012-07-09 03:44:49 UTC Laser Cutter/Engravier realy inexpenve Drew Rogge 2012-07-09 11:52:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Tony Smith 2012-07-09 13:15:21 UTC RE: [CAD_CAM_EDM_DRO] Laser Cutter/Engravier realy inexpenve Tony Smith 2012-07-09 13:20:19 UTC RE: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Ronald Cody 2012-07-11 17:19:22 UTC RE: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine Mihaly Kis 2012-07-12 06:40:46 UTC Re: [CAD_CAM_EDM_DRO] Re: Keling - Laser Cutting/Engraving Machine