CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] move error in MACH3

Posted by Dan Mauch
on 2012-12-02 05:47:27 UTC
Try this. Press the tab key to bring up the MPG set the mpg to move .500
and press enter". Click on the cycle step mode. Zero the DRO. Then Did it
move .5?



If that worked then do this. In the MdI window enter G90. Zero the X axis
display then enter G0 X.5 and see what it does.

Dan



Dan Mauch

www.camtronics-cnc.com

dmauch@...

Stepper and servo motors

Kits, assembled and custom CNC using Gecko products.





[Non-text portions of this message have been removed]

Discussion Thread

ebiz_59 2012-12-01 16:03:11 UTC move error in MACH3 Ron Thompson 2012-12-01 21:14:21 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 chuck merja 2012-12-01 22:55:20 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 Dan Mauch 2012-12-02 05:47:27 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 jeremy youngs 2012-12-02 10:13:12 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 Jon Elson 2012-12-02 11:02:59 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 chuck merja 2012-12-03 07:45:14 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 Jon Elson 2012-12-03 10:21:30 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 chuck merja 2012-12-04 09:08:36 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 Drew Rogge 2012-12-04 09:21:09 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 Ron Thompson 2012-12-04 09:23:20 UTC Re: [CAD_CAM_EDM_DRO] move error in MACH3 ScottT 2012-12-04 13:31:59 UTC Re: move error in MACH3 Dan Mauch 2012-12-04 17:54:26 UTC RE: [CAD_CAM_EDM_DRO] move error in MACH3 Norman Bain 2012-12-04 17:55:08 UTC Re: [CAD_CAM_EDM_DRO] Re: move error in MACH3