CAD CAM EDM DRO - Yahoo Group Archive

Re: Programmable logic controller

Posted by totallyrc
on 2013-05-20 07:06:03 UTC
Yes it can. The only limitation is that if you don't have the original program or a printout of the logic all you will see is the contacts and coils without any descriptions.
The newer stuff allows you to store everything right on the controller.

Mike
--- In CAD_CAM_EDM_DRO@yahoogroups.com, Ron Thompson <ron@...> wrote:
>
> Hey everyone,
> I have a rookie question about PLCs.
> Can the current program be read from a PLC? Specifically a GE-Fanuc
> Series 90-30.
> I need to work on an automatic saw with one of these, but the screen
> (human interface device) is missing.
>
> Thanks!
>
> --
>
>
> Ron Thompson
> On the Beautiful Florida Space Coast, right beside the Kennedy Space Center, USA
>
> Think, Draw, Print. 3D printers ROCK!
>
> http://www.plansandprojects.com/My%20Machines/PrusaMendel2012-1/
>
> http://www.plansandprojects.com My hobby pages are here:
> http://www.plansandprojects.com/My%20Machines/
>
> Visit the castinghobby FAQ:
> http://castinghobbyfaq.bareboogerhost.com/
>

Discussion Thread

Ron Thompson 2013-05-19 10:19:09 UTC Programmable logic controller Randy 2013-05-20 06:37:47 UTC RE: [CAD_CAM_EDM_DRO] Programmable logic controller totallyrc 2013-05-20 07:06:03 UTC Re: Programmable logic controller Ron Thompson 2013-05-20 14:28:53 UTC Re: [CAD_CAM_EDM_DRO] Programmable logic controller Ron Thompson 2013-05-20 14:32:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Programmable logic controller Randy 2013-05-20 14:37:29 UTC RE: [CAD_CAM_EDM_DRO] Programmable logic controller Ron Thompson 2013-05-20 14:45:10 UTC Re: [CAD_CAM_EDM_DRO] Programmable logic controller Randy 2013-05-20 15:15:00 UTC RE: [CAD_CAM_EDM_DRO] Programmable logic controller