RE: [CAD_CAM_EDM_DRO] Machinist Handbook location
Machinery's Handbook is really not the same thing as the Navy Machinist's Handbook.
Machinery's handbook is mainly for reference, like to find out the maximum major diameter of a 1/4-28 thread in a certain tolerance, for example.
The Navy Machinist's Handbook seems to be more of a general teaching volume on how to machine.
Andy Wander
From:
CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Vince Negrete
Sent: Monday, December 09, 2013
6:52 PM
To:
CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO]
Machinist Handbook location
Thank You for the update on the current version Ralph.
Yes, Andy I was referring to the Machinery's one. I guess I'm to
overloaded with the version I have to look for the Navy one. I guess I
should
adopt the Navy version since I'm sure its got to be better than what I
have. Getting the electronic version would be great but in my shop I'm
used to pulling out the book version.
What do you think I should stick to using? Is there an updated Navy
Print that I can order somewhere?
Thanks for the info on an Alternate-source.
Vince
On 12/9/2013 2:03 PM, Andy Wander wrote:
Vince:
I believe that you are referring to Machinery's Handbook, while the group has copies of the Navy Machinist's Handbook.
Andy Wander
From: CAD_CAM_EDM_DRO@yahoogroups.com [mailto:CAD_CAM_EDM_DRO@yahoogroups.com] On Behalf Of Vince Negrete
Sent: Monday, December 09, 2013 4:31 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Machinist Handbook location
What Edition of Machinist Handbook are we up to? I have Edition 26 but I'm not sure what year that would reflect..??
What would 2013-2014th edition number be?
Thank You ahead of time for any help with this.
Vince
On 12/7/2013 8:07 PM, wanliker@... wrote:
Click here: HANDBOOKS - Yahoo Groups The Machinist Handbook is in this specific group.
Located in the files. HANDBOOKS - Yahoo Groups
I also need a co owner or two to be sure it is maintained in the future, as I will be 78 on the 30 th....
Check in to the group once in a while, maybe post a test message to show activity. If it disappears, make a new group, and load the Handbook, and also post the location in other groups that might be interested.
Maybe add other files of interest to learning machinists, ask others to do so.
Just thoughts..
bill
List Grandma