Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC
Posted by
Jon Elson
on 2014-02-28 19:03:52 UTC
On 02/28/2014 11:31 AM, Vince Negrete
wrote:
Yes, it lists the info detected when enumerating pci devices.Sorry to jump-in here....
What Utility is "lspci" ?? Is it an OS util. in the /etc directory?
If that shows info like (v)-version, I'd try "/h, /?, -h, etc... also.
Some of these may be plug-in cards, others are motherboard devices
that use the pci bus. Pretty much all Linux systems that could
have a pci bus should have this utility.
Jon
Discussion Thread
Jerry Jankura
2014-02-26 08:19:44 UTC
ZV6000+SPP100+LinuxCNC
han
2014-02-26 08:33:20 UTC
Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC
2014-02-28 07:01:06 UTC
Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC
Vince Negrete
2014-02-28 09:31:40 UTC
Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC
Jon Elson
2014-02-28 19:03:52 UTC
Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC
Vince Negrete
2014-02-28 19:19:08 UTC
Re: [CAD_CAM_EDM_DRO] ZV6000+SPP100+LinuxCNC