CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Careful with firearms

Posted by Darrell
on 2000-08-22 09:30:26 UTC
When I said work FOR a licensed gunsmith, that is what I meant. You would
then be under his license and he would be responsible for the legal stuff.
Darrell

----- Original Message -----
From: "Joe Vicars" <jvicars@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Tuesday, August 22, 2000 9:23 AM
Subject: [CAD_CAM_EDM_DRO] Careful with firearms


> A few years ago I downloaded the federal firearms regulation (a
portion of it) several hundred pages.
> I have considered several firearms projects over the years but was
discouraged after reading the laws.
> You can be imprisoned for 10 years on first offense for some pretty
obscure things.
>
> 1. Unlicensed Possesion of COMPONENTS of class 3 weapons (trigger
assemblies, sears, etc.)
> 2. Almost any alteration of a firearm that can be considered "suspicious"
(very gray area).
> 2. Unlicensed Possesion of COMPONENTS to build silencers or suppressors
or ANY device that will reduce the audible report of ANY
> firearm (compressed air/gas guns can be included).
>
> There are lots of loopholes and exceptions, I would do lots of
research before attempting any firearms work.
>
>
>
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@egroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@egroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@egroups.com
> List owner: CAD_CAM_EDM_DRO-owner@egroups.com, wanliker@...
> Moderator: jmelson@... [Moderator]
> URL to this page: http://www.egroups.com/group/CAD_CAM_EDM_DRO
> FAQ: http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
>

Discussion Thread

Darrell 2000-08-22 09:30:26 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms Jon Anderson 2000-08-22 09:33:09 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms Jon Anderson 2000-08-22 09:44:18 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms Doug Harrison 2000-08-22 17:13:16 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms mgrady 2000-08-22 17:36:29 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms bfp 2000-08-22 17:40:36 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms JanRwl@A... 2000-08-22 21:30:39 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms Jon Elson 2000-08-22 22:24:31 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms ptengin@a... 2000-08-23 03:07:03 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms Jon Elson 2000-08-23 15:33:59 UTC Re: [CAD_CAM_EDM_DRO] Careful with firearms