Re: [CAD_CAM_EDM_DRO] Through hole plating
Posted by
ptengin@a...
on 2000-09-01 20:13:44 UTC
On small boards, many through hole parts can be soldered on both sides.
Other holes just put a piece of wire wrap wire through and solder.
Darrell
Whip out some brass bar stock and cnc lathe turn some eyelets!!
Peter
THRD, Inc.
Other holes just put a piece of wire wrap wire through and solder.
Darrell
Whip out some brass bar stock and cnc lathe turn some eyelets!!
Peter
THRD, Inc.
Discussion Thread
James Owens
2000-09-01 14:54:53 UTC
Through hole plating
Kenn Danner
2000-09-01 16:18:14 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
Jeff Barlow
2000-09-01 17:38:35 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
ballendo@y...
2000-09-01 18:49:33 UTC
Re:Through hole plating
Darrell
2000-09-01 19:22:48 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
ptengin@a...
2000-09-01 20:13:44 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
Lou Jackson
2000-09-01 21:22:24 UTC
Re: Through hole plating
JanRwl@A...
2000-09-01 22:30:43 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
JanRwl@A...
2000-09-01 22:33:47 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
Kenn Danner
2000-09-02 13:32:43 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating
Dennis Cranston
2000-09-02 17:05:46 UTC
RE: [CAD_CAM_EDM_DRO] Through hole plating
Bertho Boman
2000-09-03 16:38:16 UTC
Re: [CAD_CAM_EDM_DRO] Through hole plating