Re: [CAD_CAM_EDM_DRO] Hardware for CNC conversion

In a message dated 9/7/00 8:51:33 PM Mountain Daylight Time,
Area51tats@... writes:

<< 3 volts coil 3.5 ohm 1.8
deg/step dont have a clue if these will even work on a sherline
conversion
but I am willing to try even if it means having to gear them down. >>
they will probably be pretty small, but also remember to use about 25 volts
in the power supply, Dan at Camtronics can give you guidance if you are using
his kits.
bill