RE: [CAD_CAM_EDM_DRO] SURVEY: Respond with your configuration

> 1. Design work : software used

Vector CAD/CAM

> 2. G-Code Translation from design : software used

Vector CAD/CAM

> 3. G-Code to machine control signals : software/hardware used

EMC in stepper mode

> 4. Actual drive components : drivers/motors used

Formerly Camtronics 5 amp chopper driver and 550 in/oz superior steppers
Now Geckodrive step and direction servo drives and a mix of motors

> 5. Machine controlled : (i.e. Bridgeport mill, etc.)

Shoptask 3 in 1 in both mill and lathe configuration

Tim
[Denver, CO]