CAD CAM EDM DRO - Yahoo Group Archive

Re: configuring computer for DRO

Posted by Jeff Rossel
on 2000-09-10 06:53:22 UTC
Bill
How about the source code? I would love to take a look.

Jeff


--- In CAD_CAM_EDM_DRO@egroups.com, William Scalione <scalione@n...>
wrote:
> Carey L. Culpepper wrote:
> >
> > The latest dilemma in my ongoing Bridgeport to CNC conversion
project. I
> > have built one of Dan's DRO boards to use with my conversion
since the
> > motors already have encoders and the closed loop operation sounds
like
> > the way to go. The problem is that my computer setup does not
want to
> > recognize the existance of the board in the ISA slot. The
computer setup
> > is an IBM Thinkpad 166mhz and a docking station to give me the ISA
> > slots. The reason for the notebook is -space(lack of) and flying
metal
> > chips and electronics.
>
>
> Carey
>
> If you haven't got the dro board to work yet take a real close look
at the
> solder side of the board, where the LS7261 chips are. there are a
couple
> of traces that are very very close together. It's easy to get a
solder
> bridge there.
>
> Also you can try a program I wrote in VB to read the dro board it's
located
> at http://www.star-telegram.com/homes/scalione/VB_Dro.zip
>
> It's not perfect, and you can be the first to try it.
>
> Bill

Discussion Thread

Carey L. Culpepper 2000-07-27 17:52:51 UTC configuring computer for DRO Tim Goldstein 2000-07-27 18:44:10 UTC RE: [CAD_CAM_EDM_DRO] configuring computer for DRO Carey L. Culpepper 2000-07-27 19:05:03 UTC Re: [CAD_CAM_EDM_DRO] configuring computer for DRO William Scalione 2000-07-28 22:13:08 UTC Re: [CAD_CAM_EDM_DRO] configuring computer for DRO Jeff Rossel 2000-09-10 06:53:22 UTC Re: configuring computer for DRO