Re: deskNC

I am interested in if you were usingthe dos or the windows version of
desknc.?
If you are having problems with it I may be able to help.
Dan

-----Original Message-----
From: Jon Anderson <janders@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Monday, June 28, 1999 10:05 PM
Subject: Re: [CAD_CAM_EDM_DRO] deskNC

>From: Jon Anderson <janders@...>
>
>TADGUNINC@... wrote:
>
>> Has anyone used deskNC, or desKAM? Would either of these be a
>> decent start to get comfortable with cnc machining?
>
>
>I didn't have much luck with deskNC, but I did use the demo version of
>desKAM to generate G-code to engrave a customer's logo on a part I make
>for them.
>Generated the font in Cadkey97 using a TT font, then went and used the
>Draw-Arc-Through Three Points function to get around the perimeter of
>the font. Cleaned up end entity intersections, exported into desKAM, and
>viola. Took a matter of seconds. Had only to pick out the points between
>letters where I had to add Z up and down moves. Turned out very nice. I
>think there are some redundant moves in the code, but I sure can't
>complain.
>I think it can be qwirky, but as far as I know, there's nothing even
>close to it for the price.
>
>Jon
>
>--------------------------- ONElist Sponsor ----------------------------
>
>ONElist: where real people with real interests get connected.
>http://www.onelist.com
>Join a new list today!
>
>------------------------------------------------------------------------
>Welcome to CAD_CAM_EDM_DRO@...,an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>bill,
>List Manager
>