CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Magneto Help

on 2000-11-01 08:15:43 UTC
Joe: That would work. Could be very dangerous but it would work. You may
find that there are 2 magnets in the flywheel(different poles) and that
would require 8 magnets for 4 sparks.Safely securing the magnets may be
a problem. When you start chopping on a flywheel it could be very
dangerous. Centrifical force can cause it to explode, taking out
whatever happens to be in the way. A friend narrowly avoided loosing his
feet in a clutch explosion about a month ago. A passenger would not have
been so fortunate. The bellhousing dissappeared(all over the race
course) and pieces of clutch penetrated the passenger side
footwell.Racecars have been cut in half by clutch/flywheel explosions.
Be very ,very careful. Carey

Discussion Thread

Joe Vicars 2000-11-01 06:18:39 UTC Magneto Help Carey L. Culpepper 2000-11-01 07:12:53 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help Joe Vicars 2000-11-01 07:32:12 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help Carey L. Culpepper 2000-11-01 08:14:55 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help Carey L. Culpepper 2000-11-01 08:15:43 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help Darrell 2000-11-01 09:47:39 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help Derek B. 2000-11-01 18:14:05 UTC Re: [CAD_CAM_EDM_DRO] Magneto Help