Help...Re: More Bridgport lube questions.
Posted by
Lee Studley
on 2000-11-02 17:00:25 UTC
Jon,
I found the spindle oil cup!!!, it had been ripped off in the process
of moving and rotating the head, (talk about a bull in a china
shop...) and was in a bag of parts I had.
I removed the left-side cover of the mill head opposite the quill
handle and found a clear tube that takes the cup/pipe holder oil
'path' to a right angle brass fitting into the side of the quill.
That solves that mystery! Boy I'm glad I didnt go and fill the
'plug' area.
Should I pour a small or certain amount of oil in the
drain plug area?
I'm using Mobil velocite #6 spindle oil. (they had a #10 also, but
I wasnt sure which to get).
-Lee
I found the spindle oil cup!!!, it had been ripped off in the process
of moving and rotating the head, (talk about a bull in a china
shop...) and was in a bag of parts I had.
I removed the left-side cover of the mill head opposite the quill
handle and found a clear tube that takes the cup/pipe holder oil
'path' to a right angle brass fitting into the side of the quill.
That solves that mystery! Boy I'm glad I didnt go and fill the
'plug' area.
Should I pour a small or certain amount of oil in the
drain plug area?
I'm using Mobil velocite #6 spindle oil. (they had a #10 also, but
I wasnt sure which to get).
-Lee
--- In CAD_CAM_EDM_DRO@egroups.com, Jon Elson <jmelson@a...> wrote:
> by
> a thing that looks very similar to a pipe cleaner - a wire and a
cord,
> essentially. The quill/spindle oil reservoir is a fairly large
flip-top
>
> oil cup. The oil is delivered by capillary action, rather than
gravity.
Discussion Thread
Lee Studley
2000-11-02 14:18:40 UTC
More Bridgport lube questions.
Jon Elson
2000-11-02 14:43:38 UTC
Re: [CAD_CAM_EDM_DRO] More Bridgport lube questions.
Lee Studley
2000-11-02 14:59:37 UTC
Help...Re: More Bridgport lube questions.
Jon Elson
2000-11-02 16:07:28 UTC
Re: [CAD_CAM_EDM_DRO] Help...Re: More Bridgport lube questions.
Lee Studley
2000-11-02 17:00:25 UTC
Help...Re: More Bridgport lube questions.
Jon Elson
2000-11-02 22:51:34 UTC
Re: [CAD_CAM_EDM_DRO] Help...Re: More Bridgport lube questions.