Re: [CAD_CAM_EDM_DRO] Anderson's Follies...

Jon Anderson wrote:

> I've posted here a number of times regarding my mysterious "lost step"
> problem, and a lot of folks have taken time and offered advise trying to
> help. Want to say thanks to everyone. I finally solved it I think (knock
> on wood). It appears Ahha had some problem with the computer, an HP
> Vectra P100. I moved the I/O card and files to a Digital 486/66, and
> have been running a former problem program for half an hour with not a
> trace of lost steps.
>
> Nice to make some progress finally...

Umm, the P100 means Pentium 100 MHz? If that's a Pentium classic,
it may have the floating point divide error! If the software doesn't have
the check for that, it could cause some VERY mystifying errors.

Jon