Re: [CAD_CAM_EDM_DRO] black box specs
Posted by
GW
on 2000-12-08 06:23:48 UTC
> Jeff, you can isolate the computers on your network in at least fiveNO.
> (simple) ways that I can think of:
> 1. Using subnets masks
> 2. Protocol bindingsNO.
> 3. Workgroup namesNO.
> 4. Use different network protcolsNO.
> 5. Direct (separate) cablingYES.
'Isolation' is a question of 'collision domains' and broadcast traffic.
Multiple NICs on the same subnet will increase the load
regardless of protocol (it's all Ethernet frames @ that level).
Broadcast packets are received and processed by the CPU
and can not be filtered via MAC address.
Only direct cabling eliminates both of those problems.
Subnet masks are only good for TCP/IP and eliminates neither
problem as the mask is applied only to determine routing out
of the NIC. Protocol bindings/different protocols eliminate neither
problem as all protocols have some broadcast traffic and they
are still on the same wire. Workgroup names only work at the
Microsoft Client (OSI application) layer.
-G
Discussion Thread
GW
2000-12-07 18:43:29 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Jeff Barlow
2000-12-07 19:32:23 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Smoke
2000-12-07 20:05:08 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Jeff Barlow
2000-12-07 20:20:15 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Smoke
2000-12-07 20:58:10 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Jeff Barlow
2000-12-07 21:06:24 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Jon Elson
2000-12-07 23:54:16 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
GW
2000-12-08 06:23:48 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Gregg Wood
2000-12-08 06:44:36 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Woody
2000-12-08 07:55:38 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Jeff Barlow
2000-12-08 14:30:58 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
Woody
2000-12-08 20:55:15 UTC
Re: [CAD_CAM_EDM_DRO] black box specs
wanliker@a...
2000-12-09 20:52:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: black box specs
Mariss Freimanis
2000-12-09 21:21:59 UTC
Re: black box specs
ballendo@y...
2000-12-09 23:47:41 UTC
Re: Re: black box specs