Re: MAX NC pinout

Phil,

This is what I have.

/* defines for MAXNC step/dir port */

X_STEP_PIN SPP_D0 /* pin 2 */
X_DIR_PIN SPP_D1 /* pin 3 */

Y_STEP_PIN SPP_D2 /* pin 4 */
Y_DIR_PIN SPP_D3 /* pin 5 */

Z_STEP_PIN SPP_D4 /* pin 6 */
Z_DIR_PIN SPP_D5 /* pin 7 */

A_STEP_PIN SPP_D6 /* pin 8 */
A_DIR_PIN SPP_D7 /* pin 9 */

M3_CTRL_PIN SPP_STROBE /* (pin 1) */
M4_OUTPUT_PIN SPP_AUTOFD /* (pin 14) */
OUTPUT_NC SPP_ERR /* (pin 15) */
M7_OUTPUT_PIN SPP_INIT /* (pin 16) */
M8_OUTPUT_PIN SPP_SLC_IN /* (pin 17) */

LIMIT_SW_POS SPP_ACK /* (pin 10) */
M6_INPUT_PIN SPP_BUSY /* (pin 11) */
LIMIT_SW_NEG SPP_PE /* (pin 12) */
G61_SW_SENSOR SPP_SLCT /* (pin 13) */

Alan KM6VV
PS, or did you want 4-phase? I have that too.


Phil Laliberte wrote:

>
> Does anyone know the pinout of the parallel port cable for Max-NC?
>
> Thanks in advance.
>
> Phil