CAD CAM EDM DRO - Yahoo Group Archive

Re: MAX NC pinout

Posted by Terry May
on 2000-12-21 11:51:08 UTC
Phil's question made me realize I need to know the same info for
using EMC.
Checking the web site showed the following pin out for EMC stepper
interfaces;

Output Parallel Port
------ -------------
X direction D0, pin 2
X clock D1, pin 3
Y direction D2, pin 4
Y clock D3, pin 5
Z direction D4, pin 6
Z clock D5, pin 7

Input Parallel Port
------- -------------
X/Y/Z lim + S3, pin 15
X/Y/Z lim - S4, pin 13
X/Y/Z home S5, pin 12

My question is pretty basic, I think, does "clock" on this list mean
the same a "step" when folks commonly talk about step and direction?

Terry




--- In CAD_CAM_EDM_DRO@egroups.com, "Phil Laliberte"
<pjldesigns@h...> wrote:
> Does anyone know the pinout of the parallel port cable for Max-NC?
>
> Thanks in advance.
>
> Phil

Discussion Thread

Phil Laliberte 2000-12-21 01:21:49 UTC MAX NC pinout Alan Marconett KM6VV 2000-12-21 10:46:38 UTC Re: MAX NC pinout Terry May 2000-12-21 11:51:08 UTC Re: MAX NC pinout pwcag@a... 2000-12-21 12:18:09 UTC Re: MAX NC pinout Alan Marconett KM6VV 2000-12-21 14:39:52 UTC Re: MAX NC pinout Tony Jeffree 2000-12-22 02:48:38 UTC Re: MAX NC pinout Terry May 2000-12-22 11:18:17 UTC Re: MAX NC pinout Alan Marconett KM6VV 2000-12-22 13:22:06 UTC Re: MAX NC pinout Terry May 2000-12-22 18:34:24 UTC Re: MAX NC pinout Alan Marconett KM6VV 2000-12-22 20:09:03 UTC Re: [CAD_CAM_EDM_DRO] Re: MAX NC pinout