Re: Step & Direction 3 axis board plan
Posted by
Rick Brown
on 2001-01-04 18:01:07 UTC
Check out http://home.att.net/~wzmicro/prod01.htm for a kit (md-5)
microstepping controller (single axis). No cpu is required and
schematics and parts list are available at the site.
Rick Brown
microstepping controller (single axis). No cpu is required and
schematics and parts list are available at the site.
Rick Brown
Discussion Thread
Kos
2001-01-03 15:02:13 UTC
Step & Direction 3 axis board plan
Tim Goldstein
2001-01-03 15:21:50 UTC
RE: [CAD_CAM_EDM_DRO] Step & Direction 3 axis board plan
Kos
2001-01-03 15:29:10 UTC
Step & Direction 3 axis board plan
James Owens
2001-01-03 18:44:21 UTC
Re: [CAD_CAM_EDM_DRO] Step & Direction 3 axis board plan
Dennis Cranston
2001-01-03 19:47:11 UTC
RE: [CAD_CAM_EDM_DRO] Step & Direction 3 axis board plan
Kos
2001-01-04 08:32:05 UTC
Re: Step & Direction 3 axis board plan
Henrik Olsson
2001-01-04 08:52:11 UTC
Re: [CAD_CAM_EDM_DRO] Step & Direction 3 axis board plan
Tim Goldstein
2001-01-04 09:38:33 UTC
RE: [CAD_CAM_EDM_DRO] Re: Step & Direction 3 axis board plan
Rick Brown
2001-01-04 18:01:07 UTC
Re: Step & Direction 3 axis board plan
ballendo@y...
2001-01-05 10:01:47 UTC
Re: Step & Direction 3 axis board plan