Re: [CAD_CAM_EDM_DRO] Re: Aluminum cutting
Posted by
dave engvall
on 2001-01-16 20:46:16 UTC
Speaking of cutting aluminum.
Some years ago I cut the ends off a "Peterbuilt" front bumber which is 1/2" x approx 8" C section using a 'skil saw. One does want
to wear eye protection and be very careful about feed and wobble.
Dave
Some years ago I cut the ends off a "Peterbuilt" front bumber which is 1/2" x approx 8" C section using a 'skil saw. One does want
to wear eye protection and be very careful about feed and wobble.
Dave
Discussion Thread
Rose, Gary
2001-01-16 04:52:18 UTC
Re: Aluminum cutting
ballendo@y...
2001-01-16 12:59:37 UTC
re:Re: Aluminum cutting
A. G. Eckstein
2001-01-16 15:11:36 UTC
Re: [CAD_CAM_EDM_DRO] re:Re: Aluminum cutting
dave engvall
2001-01-16 20:46:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Aluminum cutting