CAD CAM EDM DRO - Yahoo Group Archive

Re: AMP connectors

on 2001-01-17 14:27:44 UTC
Graham

Thanks, I just ordered the tools you mentioned below. I will let you
know how this all works out.

John

-- In CAD_CAM_EDM_DRO@egroups.com, "Graham Hollis" <ghollis@s...>
wrote:
> >
> > The "proper" AMP tool is about 160 dollars. 50 dollar handle, 110
> > dollar die. It works REALLY WELL!, but you can see why Dan doesn't
> > include it?! And you need a SECOND die for the "other size"
> > connectors in the range!!!
> >
>
> There is a lower end tool available from amp which does the same
job. Costs
> about $15 from Mouser for the MTA100 (PN: 571-598031) or MTA156 (PN:
> 571-598041) t-handle tool.
>
> Regards
> Graham

Discussion Thread

Graham Hollis 2001-01-17 13:20:08 UTC Re: [CAD_CAM_EDM_DRO] AMP connectors John D. Guenther 2001-01-17 14:27:44 UTC Re: AMP connectors Tim Goldstein 2001-01-17 18:11:59 UTC RE: [CAD_CAM_EDM_DRO] AMP connectors Smoke 2001-01-17 20:57:38 UTC Re: [CAD_CAM_EDM_DRO] AMP connectors ballendo@y... 2001-01-18 03:38:29 UTC re: re: AMP connectors ballendo@y... 2001-01-18 06:05:35 UTC re:re:AMP connectors Smoke 2001-01-18 10:58:37 UTC Re: [CAD_CAM_EDM_DRO] re:re:AMP connectors ballendo@y... 2001-01-18 20:49:00 UTC Re: re:re:AMP connectors Dick Ganderton 2001-01-19 06:05:22 UTC Re: [CAD_CAM_EDM_DRO] Re: re:re:AMP connectors