Re: Home / Limit switches
Posted by
Ray
on 2001-01-26 18:35:32 UTC
Someone pointed out a while ago that it would be a bit better if the limit
switches were closed when everything was okay. A closed signal will fault
for a broken wire or connection but an open won't.
--
Ray
Murph wrote
A question to the group:
I found when doing my E-stop circuitry and sequencing that it would
probably
be much simpler if I threw a PLC I had laying around at it. Of
course, then
I'd be relying on more software/hardware to E-stop, which is of
course, questionable
depending on the application. I used to do aerospace software, did
a lot of
fault handling stuff, and was wondering what the feelings of people
with more
CNC experience were.
switches were closed when everything was okay. A closed signal will fault
for a broken wire or connection but an open won't.
--
Ray
Murph wrote
A question to the group:
I found when doing my E-stop circuitry and sequencing that it would
probably
be much simpler if I threw a PLC I had laying around at it. Of
course, then
I'd be relying on more software/hardware to E-stop, which is of
course, questionable
depending on the application. I used to do aerospace software, did
a lot of
fault handling stuff, and was wondering what the feelings of people
with more
CNC experience were.
Discussion Thread
Carlos Guillermo
2001-01-25 07:48:47 UTC
Home / Limit switches
Les Watts
2001-01-25 08:32:50 UTC
Re: [CAD_CAM_EDM_DRO] Home / Limit switches
beer@s...
2001-01-25 10:54:56 UTC
Re: Home / Limit switches
Carlos Guillermo
2001-01-25 11:11:44 UTC
RE: [CAD_CAM_EDM_DRO] Home / Limit switches
Jon Elson
2001-01-25 11:16:29 UTC
Re: [CAD_CAM_EDM_DRO] Home / Limit switches
Les Watts
2001-01-25 12:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Home / Limit switches
John Murphy
2001-01-25 12:09:38 UTC
Re: [CAD_CAM_EDM_DRO] Home / Limit switches
Bob Campbell
2001-01-25 15:45:35 UTC
Re: [CAD_CAM_EDM_DRO] Home / Limit switches
ballendo@y...
2001-01-25 17:49:35 UTC
re:Home / Limit switches
Bill Griffin
2001-01-26 09:17:36 UTC
Re: Home / Limit switches
Ray
2001-01-26 18:35:30 UTC
RE: Home / Limit switches
Ray
2001-01-26 18:35:32 UTC
Re: Home / Limit switches
Jon Elson
2001-01-27 12:35:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Home / Limit switches