CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related

Posted by Jon Elson
on 2001-02-07 13:28:13 UTC
Jon Anderson wrote:

> Jon,
>
> I'm running 3 phase into the inverter.
>
> Looking in Newark, I found the types of filters you referenced at C&H
> but in 3 phase. A Schaffner low current model at 10 amps is $88.
> Yikes!
> Well, mounting the inverter on the wall has all but eliminated the
> problem. That is, reduced it to a level I can live with for now.
> I think I'll need to evaluate what further projects I'm going to be
> putting inverters on. For just under $300, I could get a unit that would
> cover everything I might ever try to run in my shop, but I'd have to
> rewire things to get all lines feeding the inverters to the filter in as
> short a distance as possible without crossing something else.

Putting a .05 or .1 uF capacitor rated for at least 400 V from each
line terminal to ground should be nearly as effective as a packaged
filter unit. I steered you to surplus because I knew what these things
cost new!

Well, it sounds like it is not a critical situation anymore, just keep your
eyes open for sale flyers, etc. and you might come across a suitable
unit at a reasonable cost. You can search eBay, too!

Jon

Discussion Thread

Jon Anderson 2001-02-06 15:28:08 UTC Strange lost step problem, grounding related Jon Elson 2001-02-06 22:13:06 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related Jon Anderson 2001-02-07 08:59:22 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related Jon Elson 2001-02-07 09:23:23 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related Jon Anderson 2001-02-07 10:04:28 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related dougrasmussen@c... 2001-02-07 10:43:06 UTC Re: Strange lost step problem, grounding related Jon Elson 2001-02-07 13:28:13 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related dave engvall 2001-02-07 18:02:50 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related ballendo@y... 2001-02-07 18:14:35 UTC Re: Strange lost step problem, grounding related Jon Anderson 2001-02-07 18:17:33 UTC Re: [CAD_CAM_EDM_DRO] Strange lost step problem, grounding related dougrasmussen@c... 2001-02-07 19:34:19 UTC Re: Strange lost step problem, grounding related Jon Anderson 2001-02-07 20:02:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Strange lost step problem, grounding related dave engvall 2001-02-07 21:06:40 UTC Re: [CAD_CAM_EDM_DRO] Re: Strange lost step problem, grounding related dave engvall 2001-02-07 21:09:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Strange lost step problem, grounding related Mark Fraser 2001-02-08 05:36:02 UTC Re: Strange lost step problem, grounding related dougrasmussen@c... 2001-02-08 08:07:18 UTC Re: Strange lost step problem, grounding related Jon Anderson 2001-02-08 08:22:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Strange lost step problem, grounding related dave engvall 2001-02-08 09:42:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Strange lost step problem, grounding related