Re: Strange lost step problem, grounding related

Jon,

Hold off on sending money. I may have to make a run to the heat
treater this afternoon, if so I'll go to Boeing and try to find it.
Dave gave a good description of where it is. A better description
though would have been two aisles over from where I found the new
3/4hp VFD for $10 (gloat) and the Enerpac 4 way valve for $5 (more
gloat) last Saturday.

I'll let ya know...

Doug

--- In CAD_CAM_EDM_DRO@y..., Jon Anderson <janders@n...> wrote:
> Doug,
>
> Have you ever seen an RF filter inside some piece of electronics?
> Has a square or rectangular drawn can, sealed and not made to be
opened.
> A 3 phase unit would have 4 or 5 terminals on opposite sides.
> The schematic I saw in the Newark catalog shows all three hot leads
> filtered, the neutral filtered, and even an earth ground filtered.
> I assume the earth ground is the case itself but it might be a 5th
> terminal. Probably in a package about 3 x 5 x 2 at minimum, on up to
> fairly big. Only thing I'd be concerned about is that it really is
> 3phase, and rated for 10 amps min.
>
> Unless Dave remembers what it was priced at, I could send up $20 in
> advance. If it's more, I'd send the balance at once. If it's a lot
less
> or not there, surprise me with $20 worth of end mills or some such
> thing, and I'll pretend I finally got to visit Mecca <G>.
>
> Jon