Re: Good source for MaxNC-10 Belts anyone?
Posted by
tauseef
on 2001-02-11 13:26:02 UTC
hey tracy
Not knowing how long the belt is you might be able to find one that
fits at your local hobby store (if you don't have any let me know
where your at). The same type of belts are used to start some radio
control helicopter and mainly rc boat engines (ask for the company
Panter in rc boats). Another place to check would be Alphasew on the
internet as they make them for sewing machines. Bando is the company
that makes many of these belts but they don't really sell to the
public (You can find them on the internet also). How much is maxnc
charging? The sherline belts are only around $5. I have a brand new
rc "boat" belt that is cogged and is a little under 18" in diameter
and 1/4" wide let me know if that might work, I don't need it.
later
tauseef
Not knowing how long the belt is you might be able to find one that
fits at your local hobby store (if you don't have any let me know
where your at). The same type of belts are used to start some radio
control helicopter and mainly rc boat engines (ask for the company
Panter in rc boats). Another place to check would be Alphasew on the
internet as they make them for sewing machines. Bando is the company
that makes many of these belts but they don't really sell to the
public (You can find them on the internet also). How much is maxnc
charging? The sherline belts are only around $5. I have a brand new
rc "boat" belt that is cogged and is a little under 18" in diameter
and 1/4" wide let me know if that might work, I don't need it.
later
tauseef
--- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
> No suggestion on where to get the belt, but there was a list member
that had
> the same problem (premature belt wear). The belt should last a real
long
> time (years in hobby use). He found the problem was the motor mount
was too
> flexible. He made a new mount and his belt wear problems went away.
>
> Tim
> [Denver, CO]
>
> > Hi Group!
> >
> > Does anyone have a good source for replacement belts for the
MaxNC-
> > 10? Mine is wearing out after awhile and they look like they
should
> > be alot less expensive than what MaxNC is charging <grin>
> >
> >
> > Thanks!
> > Tracy
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> >
Discussion Thread
tnorris@h...
2001-02-11 08:18:11 UTC
Good source for MaxNC-10 Belts anyone?
Tim Goldstein
2001-02-11 10:13:53 UTC
RE: [CAD_CAM_EDM_DRO] Good source for MaxNC-10 Belts anyone?
tauseef
2001-02-11 13:26:02 UTC
Re: Good source for MaxNC-10 Belts anyone?
Jeff Demand
2001-02-11 15:30:25 UTC
Re: Good source for MaxNC-10 Belts anyone?
thomasm923@a...
2001-02-11 21:54:16 UTC
Re: Good source for MaxNC-10 Belts anyone?
Nicholas Carter and Felice Luftschein
2001-02-11 22:06:19 UTC
Re: Good source for MaxNC-10 Belts anyone?
Ian Wright
2001-02-12 01:23:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: Good source for MaxNC-10 Belts anyone?