Re: [CAD_CAM_EDM_DRO] 5 axis with cncpro
Posted by
Rich D.
on 2001-02-25 14:15:10 UTC
Carl,
I am just now adding a spindle motor on/off control with the CNC-Pro
M105, M105 commands via db-25 pin 16 (others can be chosen) and opto-
coupler.
There are several other optional i/o's in CNC-Pro for whatever.
Is this what you mean?
Rich D.
carlcnc@... wrote:
-==Rich=-=Colorado Midland Railway=-=<http://www.geocities.com/cmsteam/>
I am just now adding a spindle motor on/off control with the CNC-Pro
M105, M105 commands via db-25 pin 16 (others can be chosen) and opto-
coupler.
There are several other optional i/o's in CNC-Pro for whatever.
Is this what you mean?
Rich D.
carlcnc@... wrote:
>--
> Have this idea of using one of the io's to a fourpole switch to
> add 3rd z axis.
> when I want to activate the 3rd z use M command to "toggle" motor
> power.
> anyone else tried this?
>
> CB
-==Rich=-=Colorado Midland Railway=-=<http://www.geocities.com/cmsteam/>
Discussion Thread
carlcnc@s...
2001-02-25 10:29:20 UTC
5 axis with cncpro
Alan Marconett KM6VV
2001-02-25 14:07:24 UTC
Re: 5 axis with cncpro
Rich D.
2001-02-25 14:15:10 UTC
Re: [CAD_CAM_EDM_DRO] 5 axis with cncpro
ballendo@y...
2001-02-25 17:29:22 UTC
Re: 5 axis with cncpro
carlcnc@s...
2001-02-25 19:53:39 UTC
Re: 5 axis with cncpro
ballendo@y...
2001-02-25 20:43:57 UTC
Re: 5 axis with cncpro
carlcnc@s...
2001-02-25 21:40:55 UTC
Re: 5 axis with cncpro
Alan Marconett KM6VV
2001-02-26 10:51:59 UTC
Re: 5 axis with cncpro