Re: [CAD_CAM_EDM_DRO] Help I lost it

Hi Bill,

I'm not sure if it was the message I sent you are referring to but, in case
it was, here it is again:-

Hi Bill,

There should be no need to install both DOS and Windows - just install
Windows and set CHCPro to work in DOS mode. When you have installed Windows
and CNCPro, go to 'MyComputer' (desktop icon) and find the CNCPro exe file
by navigating the hard disk icon to where you have installed it. Then click
on the exe file to select it and go to the 'file' menu item. Select
Properties', then the 'Program' tab and hit the 'Advanced' button. In this
window you should see some tick boxes, one of which says 'prevent
MS-DOS-based programs from detecting Windows'. Select this and one of the
other two boxes, then, each time you run CNCPro, Windows will exit to a DOS
screen and come back to windows after you exit CNCPro. If you choose the
'MSDOS mode' instead of the 'Suggest MSDOS as necessary', you can optionally
provide custon settings in the Config.sys and Autoexec.bat files.
HTH

Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk

----- Original Message -----
From: <wanliker@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: 17 March 2001 16:31
Subject: [CAD_CAM_EDM_DRO] Help I lost it


> Recently someone either posted or sent me the procedure to lock WINDOWS in
> the DOS mode when using it, so that WINDOWS could not interfere with DOS.
> I have looked but somehow I lost it. Would that person or someone please
> send me the information again. I thought I saved it, but it is not there.
>
> Help Please,
> Thanks
> bill
>
> We have 1211 members today.
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>