Re: [CAD_CAM_EDM_DRO] Re: 5 axis wood rooter

Here's some to look at
http://www.motionmaster.com/catalog/FullSize/FS_SB44X.html
http://www.stilesmachinery.com/products_router_heian_nc151.html
http://www.cinmach.co.uk/products/Routers5Axis.htm
http://www.quintax.com/5xrouters.html

--Greg Nuspel

Wingcraft the core of great models.
http://www.wingcraft.com

----- Original Message -----
From: "Sven Peter, TAD S.A." <peteryco@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, March 17, 2001 10:39 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: 5 axis wood rooter


Dear Doug,
That it would be expencive I could imagine but that much!
I would say, strikes out the botoum of the barril.
Thank You very much. In the german groop some medical specialists make
bone models with a selfmade 5 axis machine that is only capable of working
in wax and
PU-foam. but it gets in every corner and the parts look very nice.
The workpiece is mounted on a horizontal dividing head that runs on the
Yaxis
and the spindle is on a gantry x and z axis. and it can swivel horizontally.
http://home.netsurf.de/ulrich.kliegis/ This is his
home page but don´t ask me how to get to his
machine image.
Good Luck
Sven Peter

dougrasmussen@... wrote:

> Sven,
>
> I don't know of any low cost machines that are 5 axis. I can tell
> you a little of the experiences of a customer of mine. They needed 5
> axis motion to machine expensive guitar necks and bodies. Their
> choice of machine was a Heinan from Japan. Cost was around $300,000!!
>
> Not only was the machine expensive, a custom CAM post processor that
> would correctly handle their cutting requirements cost over $5000.
> Apparently, getting their existing high dollar CAM system to generate
> cuttter paths for high speed contouring on the periphery of round
> nose cutters was not an easy thing to program.
>
> Last I heard they were still not able to fully utilize the machine's
> capabilities after having the machine for 2 years.
>
> Doug
>
> --- In CAD_CAM_EDM_DRO@y..., "Sven Peter, TAD S.A." <peteryco@r...>
> wrote:
> > Hello Folks:
> > A question:
> > Does somebody of you know about a 5 axis wood rooter?
> > I am asked to find a wood rooter where the rooter head swivels.
> > So that it can follow tangentially a S-curve.
> > The pieces to work are maximum about 95 cm by 65 cm by 10cm high
> > and made out of precious woods that are sometimes very hard.
> >
> > I am able to build a 3 axis copier but when it comes to more axis
> the
> > cost
> > explodes.
> > Does exist allready some small CNC machine reasonable priced
> > and rigid for an application like this?
> >
> > Thanks for any answer
> > Sven Peter
> >
> >
> > [Non-text portions of this message have been removed]
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


[Non-text portions of this message have been removed]


Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager

FAQ: http://www.ktmarketing.com/faq.html

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/