Re: Rhino vs Truespace?
Posted by
John Stevenson
on 2001-03-19 15:01:30 UTC
--- In CAD_CAM_EDM_DRO@e..., imserv@v... wrote:
Have you had a look at the Solid Edge Origin CD available for free
from http://www.solid-edge.com
This can save a single model in IGES, STP,STL,EMS and Parasolid files.
Millwizard will accept it's STL files so I assume that STLWorks will
do the same. Email me if you want a sample file.
Regards,
John Stevenson
> Has anybody done a serious comparison of Rhino vs Truespace 4 or 5?version
> Or know of maybe a magazine article that did a fair job of side by
> side comparison? I was reviewing the Truespace web site today & saw
> that they have an older version for as little as $49! While the
> version 5 with support for IGES, STL, SAT, etc is about $894,
> 4 is selling for under $500 and that seems to be a pretty good deal.Fred,
>
> http://www.caligari.com
>
> http://www.rhino3d.com
>
> Best Regards,
>
Have you had a look at the Solid Edge Origin CD available for free
from http://www.solid-edge.com
This can save a single model in IGES, STP,STL,EMS and Parasolid files.
Millwizard will accept it's STL files so I assume that STLWorks will
do the same. Email me if you want a sample file.
Regards,
John Stevenson
Discussion Thread
imserv@v...
2001-03-19 14:27:00 UTC
Rhino vs Truespace?
John Stevenson
2001-03-19 15:01:30 UTC
Re: Rhino vs Truespace?
John Stevenson
2001-03-19 15:05:28 UTC
Re: Rhino vs Truespace?
imserv@v...
2001-03-19 15:30:39 UTC
Re: Rhino vs Truespace?
rab@r...
2001-03-19 16:19:34 UTC
Re: Rhino vs Truespace?
John Stevenson
2001-03-19 16:38:49 UTC
Re: Rhino vs Truespace?