Re: [CAD_CAM_EDM_DRO] TTL questions
Posted by
JanRwl@A...
on 2001-03-21 12:08:35 UTC
Doug: It would be OK to clip every-other unused pins of a resistor-network
"DIP" for some home-brew, but not for one you wanted to build more than 10
copies of, or sell ONE to some "professional" customer. (not standard part,
and someone may be highly confused, if a repair need by done by other than
yourself, one day, 100 years from now.)
Don't confuse a "pull-UP" resistor with a "series resistor". The input to an
LED does not need to be "pulled up" when there is no signal IN. Not same as
a gate, which generally must (CMOS) or should (TTL) be "pulled up" to +5.
Feel free to e-mail me with such (simple!) questions, if you have reason not
to send to entire CAD-CAM group. But nothing complex, as I are ginrully
ignernt. Jan Rowland
[Non-text portions of this message have been removed]
"DIP" for some home-brew, but not for one you wanted to build more than 10
copies of, or sell ONE to some "professional" customer. (not standard part,
and someone may be highly confused, if a repair need by done by other than
yourself, one day, 100 years from now.)
Don't confuse a "pull-UP" resistor with a "series resistor". The input to an
LED does not need to be "pulled up" when there is no signal IN. Not same as
a gate, which generally must (CMOS) or should (TTL) be "pulled up" to +5.
Feel free to e-mail me with such (simple!) questions, if you have reason not
to send to entire CAD-CAM group. But nothing complex, as I are ginrully
ignernt. Jan Rowland
[Non-text portions of this message have been removed]
Discussion Thread
Doug Harrison
2001-03-19 15:40:01 UTC
TTL questions
Jon Elson
2001-03-19 16:10:43 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
Doug Harrison
2001-03-19 19:24:22 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
JanRwl@A...
2001-03-21 12:08:35 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
Marcus & Eva
2001-03-22 08:16:43 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
Jon Elson
2001-03-22 11:45:35 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
JanRwl@A...
2001-03-22 15:19:29 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions
JanRwl@A...
2001-03-22 15:20:17 UTC
Re: [CAD_CAM_EDM_DRO] TTL questions