First angle & third angle
Posted by
Peter Chen
on 2001-03-23 19:42:30 UTC
Good afternoon :-)
John Stevenson" machines@... wrote:
"The current British and ISO standards state that both
systems of projection are equally acceptable but they
should never be mixed on the same drawing""
Someone else wrote, I remembered "third angle is
easier"
Didn't realise there would be so much
interest in the cdD part of CADCAM.
I have seen too many mixture of 1st and 3rd angles
in orthographic projections!!! IMO, 1st angle should
be abolished. Why?
1. cause unneccessary confusion
2. easier to explain how to get an isometric
given the orthographic projection in 3rd. angle
3. in autocad (what about other CAD's?) one can
automatically generate views by clicking on
the side required. For example, if we have a
front view, clicking on the top will generate
a top view positioned to the top of the front
view
clicking on the right side of the front view
will generate a view of the right side positioned
on the right side of the front view
clicking on the left side of the front view will
result in the left side view positioned on the
left side of the front view/
clicking on the bottom of the front view will
result in a view of the bottom placed at the
bottom of the front view
and this is THIRD ANGLE
Is there any CAD programs that generate
orthographic projections in the FIRST ANGLE
Already enough confusion from different Gcode
dialect.
Let's make an effort in making life easier for
everyone. Let's start a campaign to abolish
first angle, AND those dialects/flavors of
Gcode that we don't like.
Simple Simon
____________________________________________________________
Do You Yahoo!?
Get your free @... address at http://mail.yahoo.co.uk
or your free @... address at http://mail.yahoo.ie
John Stevenson" machines@... wrote:
"The current British and ISO standards state that both
systems of projection are equally acceptable but they
should never be mixed on the same drawing""
Someone else wrote, I remembered "third angle is
easier"
Didn't realise there would be so much
interest in the cdD part of CADCAM.
I have seen too many mixture of 1st and 3rd angles
in orthographic projections!!! IMO, 1st angle should
be abolished. Why?
1. cause unneccessary confusion
2. easier to explain how to get an isometric
given the orthographic projection in 3rd. angle
3. in autocad (what about other CAD's?) one can
automatically generate views by clicking on
the side required. For example, if we have a
front view, clicking on the top will generate
a top view positioned to the top of the front
view
clicking on the right side of the front view
will generate a view of the right side positioned
on the right side of the front view
clicking on the left side of the front view will
result in the left side view positioned on the
left side of the front view/
clicking on the bottom of the front view will
result in a view of the bottom placed at the
bottom of the front view
and this is THIRD ANGLE
Is there any CAD programs that generate
orthographic projections in the FIRST ANGLE
Already enough confusion from different Gcode
dialect.
Let's make an effort in making life easier for
everyone. Let's start a campaign to abolish
first angle, AND those dialects/flavors of
Gcode that we don't like.
Simple Simon
____________________________________________________________
Do You Yahoo!?
Get your free @... address at http://mail.yahoo.co.uk
or your free @... address at http://mail.yahoo.ie
Discussion Thread
Peter Chen
2001-03-23 19:42:30 UTC
First angle & third angle
John Stevenson
2001-03-24 01:35:02 UTC
Re: First angle & third angle
Ian Wright
2001-03-24 02:03:13 UTC
Re: [CAD_CAM_EDM_DRO] First angle & third angle