Re: [CAD_CAM_EDM_DRO] Laser for Carbon Panels

Waterjet is another alternative that will work.

--Greg Nuspel

Wingcraft the core of great models.
http://www.wingcraft.com

----- Original Message -----
From: <MIADSGNS@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, April 01, 2001 12:43 PM
Subject: Re: [CAD_CAM_EDM_DRO] Laser for Carbon Panels


> Does anone know if a laser cutter will cut carbon (graphite) 1/16" -1/8"
> thick panels. I know carbon tends to snap with heat so I pressume that the
> intensity of the laser will cut through the panel with ease, but I could
be
> wrong. Cuting the panels with a CNC machine has shown a lot of wear and
tear
> on the cutters, I am looking for alternatives. What laser cutter,if anyone
> knows will do the job. Anyone know how the RC car chassis carbon,
> fiberglass plates are cut with precision?
>
> TIA
>
> Mario
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>