Re: [CAD_CAM_EDM_DRO] New for your tool box

If I need a tool like that, I'll weld a socket to a pair of vise grips and
use a standard wrench with it. However...You'd have to be a bit careful
using it as the scales would not register correctly.

Smoke

>There is a new tool out there everyone should have in their tool box. You
>can look at it here: http://sheldonbrown.com/tork-grip.html I hear that
>there will be a limited production run on them.
>
>--Greg Nuspel
>
>Wingcraft the core of great models.
>http://www.wingcraft.com
>
>
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

>
>Addresses:
>Post message: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>FAQ: http://www.ktmarketing.com/faq.html
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>