Re: [CAD_CAM_EDM_DRO] New for your tool box

Smoke,

Please note the date and take a look at the scale graduations. Sheldon
always has a good one for April 1st.

--Greg Nuspel

Wingcraft the core of great models.
http://www.wingcraft.com

----- Original Message -----
From: "Smoke" <gordonr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, April 01, 2001 5:27 PM
Subject: Re: [CAD_CAM_EDM_DRO] New for your tool box


> If I need a tool like that, I'll weld a socket to a pair of vise grips and
> use a standard wrench with it. However...You'd have to be a bit careful
> using it as the scales would not register correctly.
>
> Smoke
>
>
> >There is a new tool out there everyone should have in their tool box. You
> >can look at it here: http://sheldonbrown.com/tork-grip.html I hear that
> >there will be a limited production run on them.
> >
> >--Greg Nuspel
> >
> >Wingcraft the core of great models.
> >http://www.wingcraft.com
> >
> >
> >
> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> >Addresses:
> >Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> >Moderator: jmelson@... timg@... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >FAQ: http://www.ktmarketing.com/faq.html
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>