Re: [CAD_CAM_EDM_DRO] Re: Nicaragua machine shops

Ian you´ll laugh but close to me is a farm with it own hidroplant.
It dates from 1932 designed with open ball bearings runing under water.
it needs grease once a day and was only 3 weeks off in nearly 70 years.
Wind power plan are lots now here in the mountains. They are much more
expensive in instalation and maintainance.
I look for years for a farm with own water. Perhaps someone of the groop
will be able to build his own Water power plant.
Good Luck
Sven Peter

Ian Wright wrote:

> Aren't any of you near water? I have always dreamed of having a stream in my
> back yard or river nearby so I could build a little water wheel and generate
> my own power. Seems with all the big stepper motors lying about it wouldn;t
> be such a difficult task.
> I watched a program here last night on new technology (Tomorrows world) and
> in that a guy in Australia is planning to fly a load of very basic
> helicopter-type things like kites. The 'generator' will be powered to get
> the things airborn and to a suitable height to catch the best winds and they
> will then be ties off and the free rotation of the rotors will both keep the
> thing aloft and generate up to about 6 gigawatts of power from each 'copter.
>
> Ian
> --
> Ian W. Wright
> Sheffield UK
> www.iw63.freeserve.co.uk
> ----- Original Message -----
> From: "Alan Marconett KM6VV" <KM6VV@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: 29 March 2001 20:00
> Subject: [CAD_CAM_EDM_DRO] Re: Nicaragua machine shops
>
> > Hi Mariano, Ian,
> >
> > Don't laugh! I might just have to do that here in California, if the
> > power shortage problem gets much worse! Good thing I've got candles so
> > I can program on the computer when the lights go out! ;>)
> >
> > Alan KM6VV
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]