Re: Autosketch

Sven

have you looked at TurboCad. It can save files in an Autocad
compatible format, has 3d etc etc and is under $200 -
www.turbocad.com or www.imsisoft.com

Paul A
Visual Fx (Aust)

--- In CAD_CAM_EDM_DRO@y..., "Sven Peter, TAD S.A." <peteryco@r...>
wrote:

> Might be it is old but the Drawfix version (only 2 dimensions from

1994)

> I use is pretty good
> and most of all accurate compared to Autocad versions 7 and 8 I had

to

> use some 15 years ago.
> Probably nowadays there is something decent available for little

money.

> But before the
> stripped down programs like easycad were only useful for the junk.
> Perhaps somebody can recommend me a volume type cad program that is
> affordable.
> and well working. Pro engineer is 32000 bucks much more than

reasonable.

> And Autocad
> still 4300 Bucks on the local market.
> Have a nice day
> Sven Peter
>
>
> Wayne Bengtsson wrote:
>
> >> -----Original Message-----
> >> From: Ian Wright [mailto:Ian@i...]
> >
> >> I've had to use Autosketch on-and-off since 1980. It started out

pretty

> >> useless and hasn't progressed very far from there! There are a

number of

> >> free programs about which are much better. Intellicad, which you
> >> mention, is
> >
> >
> > Although I agree that Intellicad is better than Autosketch in a

lot of ways,

> > I differ in my opinion of the utility of Autosketch. The first

application I

> > bought with my shiny new 8088 computer was Autosketch V 1.0.

Autosketch has

> > only been available since 1986, but the current product is more a

descendent

> > of something called Drafix Cad, if my information is correct.
> >
> > For less than $100, I think I got my moneys worth. Compared with

Version 1

> > of Design Cad 3D, Autosketch was an absolute bargain, in terms of

useability

> > and utility.
> >
> > I have both Autosketch (6.0) and Intellicad installed on this

computer. I

> > usually use to Autosketch, maybe because I had to pay for it :-).
> >
> >
> >
> >
> > Welcome to CAD_CAM_EDM_DRO@e...,an unmoderated list for the

discussion of shop built systems, for CAD, CAM, EDM, and DRO.

> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]