Re: [CAD_CAM_EDM_DRO] Autosketch
Posted by
Sven Peter, TAD S.A.
on 2001-04-05 11:56:56 UTC
Might be it is old but the Drawfix version (only 2 dimensions from 1994)
I use is pretty good
and most of all accurate compared to Autocad versions 7 and 8 I had to
use some 15 years ago.
Probably nowadays there is something decent available for little money.
But before the
stripped down programs like easycad were only useful for the junk.
Perhaps somebody can recommend me a volume type cad program that is
affordable.
and well working. Pro engineer is 32000 bucks much more than reasonable.
And Autocad
still 4300 Bucks on the local market.
Have a nice day
Sven Peter
Wayne Bengtsson wrote:
I use is pretty good
and most of all accurate compared to Autocad versions 7 and 8 I had to
use some 15 years ago.
Probably nowadays there is something decent available for little money.
But before the
stripped down programs like easycad were only useful for the junk.
Perhaps somebody can recommend me a volume type cad program that is
affordable.
and well working. Pro engineer is 32000 bucks much more than reasonable.
And Autocad
still 4300 Bucks on the local market.
Have a nice day
Sven Peter
Wayne Bengtsson wrote:
>> -----Original Message-----[Non-text portions of this message have been removed]
>> From: Ian Wright [mailto:Ian@...]
>
>> I've had to use Autosketch on-and-off since 1980. It started out pretty
>> useless and hasn't progressed very far from there! There are a number of
>> free programs about which are much better. Intellicad, which you
>> mention, is
>
>
> Although I agree that Intellicad is better than Autosketch in a lot of ways,
> I differ in my opinion of the utility of Autosketch. The first application I
> bought with my shiny new 8088 computer was Autosketch V 1.0. Autosketch has
> only been available since 1986, but the current product is more a descendent
> of something called Drafix Cad, if my information is correct.
>
> For less than $100, I think I got my moneys worth. Compared with Version 1
> of Design Cad 3D, Autosketch was an absolute bargain, in terms of useability
> and utility.
>
> I have both Autosketch (6.0) and Intellicad installed on this computer. I
> usually use to Autosketch, maybe because I had to pay for it :-).
>
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Discussion Thread
Tony Jeffree
2001-04-05 00:23:14 UTC
Re: [CAD_CAM_EDM_DRO] Autosketch
Ian Wright
2001-04-05 02:13:06 UTC
Re: [CAD_CAM_EDM_DRO] Autosketch
Wayne Bengtsson
2001-04-05 08:43:07 UTC
RE: [CAD_CAM_EDM_DRO] Autosketch
Sven Peter, TAD S.A.
2001-04-05 11:56:56 UTC
Re: [CAD_CAM_EDM_DRO] Autosketch
PAbbott@w...
2001-04-05 15:53:43 UTC
Re: Autosketch
buddycoyote
2002-05-31 21:22:54 UTC
Autosketch
Chris L
2002-06-01 05:51:04 UTC
Re: [CAD_CAM_EDM_DRO] Autosketch
kdoney_63021
2002-06-01 12:34:04 UTC
Re: Autosketch