Re: [CAD_CAM_EDM_DRO] mirror finish on aluminum?

Hello George,
After milling You will have to lap and polish.
Anyway it will be nasty working with aluminium.
The minimum dirt and it gets streched again.
Have fun
Sven Peter

george@... wrote:

> I have a retrofited RF 30 and I'm trying to get a mirror finish on a
> 4"x4" piece of 6061T Aluminum. I'm using a 3" fly cutter with various
> tooling but I just cant to get a mirror finish. Is it posible? Or is
> there another step after milling to get a mirror finish. I know the
> head needs to be trammed but figured that would'nt effect this.
>
> T.I.A.
> Geo.
>
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>