Re: [CAD_CAM_EDM_DRO] DeskNC pulse generator

Dan,

Tell us a little more about the "black box". Who makes it, and what is in
it? Does the EMC documentation tell us about it?

Is Jon Elson's pulse generator what you are talking about?

Tom Eldredge

----- Original Message -----
From: Dan Mauch <dmauch@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, April 18, 2001 8:51 AM
Subject: Re: [CAD_CAM_EDM_DRO] DeskNC Windows version


> You must not have seen my post a few weeks ago about the DeskNC for
windows.
> The black box works slick. On the old DeskNC for dos I could get about
3000
> sps per second out of my 5A driver. With the black box and a little bit of
> tuning I got the same driver and same stepper motor running at 9500 steps
> per second . It was really smooth. I was impressed. I also tested it with
a
> G320 and it too ran great. The only current problems are :
> 1. no backlash compensation,
> 2. constant contouring isn't finished.
> 3. really odd pin out from his db25 that requires a breakout box.
> Otherwise it looks and runs very well.
> Dan
> -----Original Message-----
> From: Tim Goldstein <timg@...>
> To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
> Date: Tuesday, April 17, 2001 9:55 PM
> Subject: [CAD_CAM_EDM_DRO] DeskNC Windows version
>
>
> >Has anyone gotten one of the hardware pulse generators that is needed to
> run
> >DeskNC window version and given it a try? I downloaded the software this
> >morning and gave it a quick try in demo mode. Ran just fine on Windows
> 2000.
> >Didn't get to do a lot of testing, but it looks like interesting. Only 2
> >things I see as serious drawbacks is it does not support G61 (great for
> >drilling PCB and not breaking drills) and that it does not support 4 axis
> >setups.
> >
> >Tim
> >[Denver, CO]
> >
> >
> >Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> >Addresses:
> >Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> >Moderator: jmelson@... timg@... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >FAQ: http://www.ktmarketing.com/faq.html
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>