Re: [CAD_CAM_EDM_DRO] Plastic & UV - Materials Question
Posted by
jesse
on 2001-05-08 10:50:03 UTC
Off hand use a heavy carbon filled (black) material. Polyethylene
should be ok if black,
Black Polypropylene should be ok too. Polycarbonate mey be better.
This will be true for intense sunlight exposure . With a
uv lamp ? Sorry this is all I have in my head.
Jesse
John wrote:
should be ok if black,
Black Polypropylene should be ok too. Polycarbonate mey be better.
This will be true for intense sunlight exposure . With a
uv lamp ? Sorry this is all I have in my head.
Jesse
John wrote:
> Folks,
> have recently made a prototype holder for a UV lamp, its is one of these
> anti bacteria units. Used gray PVC, but after about 30 hours it became
> brittle, well customer dropped and it fractured into many bits!
> Can anybody recommend a material for this application, one for machining
> a prototype, and if possible for injection moulding when in production.
> Personally was thinking of HDPE or PP they are chemically pretty stable.
>
> any suggestions
>
> John
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
John
2001-05-08 05:05:51 UTC
Plastic & UV - Materials Question
Jerry Kimberlin
2001-05-08 10:46:20 UTC
Re: [CAD_CAM_EDM_DRO] Plastic & UV - Materials Question
jesse
2001-05-08 10:50:03 UTC
Re: [CAD_CAM_EDM_DRO] Plastic & UV - Materials Question
wanliker@a...
2001-05-08 11:29:23 UTC
Re: [CAD_CAM_EDM_DRO] Plastic & UV - Materials Question
dave engvall
2001-05-08 21:48:21 UTC
Re: [CAD_CAM_EDM_DRO] Plastic & UV - Materials Question
John
2001-05-10 07:38:34 UTC
Re: Re: Plastic & UV - Materials Question