Re: [CAD_CAM_EDM_DRO] Felt Way wipers on SEriesII ok.??.. wasRe:Lubrication for CNC

Lee,
Good Luck
The modification is easy and you enjoy the result afterwards.
If you go step by step you can make out of an old work horse still
a nice machine for hobby and prototyping.
Have fun.
Sven Peter

Lee Studley wrote:

> Hi Sven,
> Thanks for the good information. Its a Bridgeport seriesII CNC 1978
> vintage, but it seems to be a real workhorse.
>
> -Lee
>
> --- In CAD_CAM_EDM_DRO@y..., "Sven Peter, TAD S.A." <peteryco@r...>
> wrote:
> > Hello Lee,
> > You are right! Or you can put a small spacer below the old wiper
> body
> > and
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]